Retrofitting: Definition, types, benefits, and drawbacks
rent flat in mumbra : Retrofitting, the process of equipping historical sites, antiquated structures, bridges, and other structures with contemporary technology and equipment, may be advantageous for all of these structures. With the RCC approach, concrete pieces that have degraded with time or wear and tear can be upgraded with fresh, stronger parts. Another benefit is the avoidance of additional concrete hardship. The likelihood that an existing structure would sustain damage in the case of a natural disaster or seismic activity may be reduced through retrofitting. Modifications could also be brought on by other elements, like the aggressivity of potentially harmful chemicals.
Are You Looking For Flat in Ghodbunder Road?
The concrete element’s lack of endurance could be attribute to poor design or shoddy construction. If the essential capacity can be restore by retrofitting once the relevant technology has been complete and define. It all depends on the level of the damage the structure has receive. To find out more about retrofitting, read the article.
Retrofitting: Modification types
- In order to reduce power costs and improve indoor air quality (IAQ), HVAC systems can be upgrade by replacing outdate equipment with newer, more efficient units.
- Installing low-flow showerheads, toilets, and faucets could reduce water consumption and cost.
- An example of a renewable energy system is the installation of solar cells, wind turbines, or other renewable energy systems to provide clean energy and reduce reliance on fossil fuels.
- A significant reduction in heat loss and an improvement in the efficiency of HVAC systems may result from the installation of insulation in previously uninsulated walls, ceilings, and floors.
- Inefficient incandescent bulbs are frequently replace with more economical, energy-efficient compact fluorescent or LED lights as part of lighting system upgrades.
Retrofitting: Objectives
There are several problems that might occur with structural parts that need to be solve. Among these are structural fractures, fissures in structural elements, seismic damage, honeycomb corrosion, alterations to the structural system, and faulty design or construction. Retrofitting can be use to address these problems.
Retrofitting: Techniques
This is a typical technique for modernising older structures built of non-ductile reinforced concrete frames. Adding a new shear wall to the structure.
By using steel reinforcement: Steel bracing is a workable option for making large apertures while upgrading a structure.
How to increase the walls’ thickness: To raise the wall thickness of a structure, bricks, concrete, and steel are strategically affix to the existing walls.
The procedure for separating the base: Base isolation is the process of separating the higher levels of the structure from their corresponding substructures. This is the most effective passive technique for controlling structural vibration.
Technique for mass reduction: In this method. It is clear that less mass results in less loading, which necessitates greater strength.
Method of jacketing: In the jacketing procedure, fresh concrete that has been strengthen in both the longitudinal and transverse directions is place over existing columns. This is the most typical way to change a framework.
FRP: Fiber Reinforced Polymer Using fiber-reinforce polymers, an axial strengthening technique, the strength of reinforce concrete beams can be improve.
Method for injecting epoxy: Epoxy injection is a practical way to repair static cracks in concrete. Injecting epoxy into the affect region is occasionally use to repair structural damage in older structures.
Retrofitting: Benefits
- The act of enhancing an existing structure as oppose to building a new one from start is refer to as “retrofitting.”
- Green practises can be retrofit into a building to lower its carbon impact.
- A structure that has undergone this modification will require less maintenance due to the drop in energy consumption.
- The energy efficiency of a building can be significantly increase by retrofitting.
- Consider retrofitting if you want to increase a building’s quality and durability at a fair price.
Retrofitting: Drawbacks
- If retrofitting is not done by an experience and qualify team of engineers, it could potentially go wrong.
- It is pricey.
- To do the task, you must have the required staff, tools, and knowledge.
- During the retrofitting process, occupants will experience disturbances to their normal life.
You’re looking for Flat in Diva we have the Best Properties In Thane. Like Ready to Move & Nearby possession: https://navimumbaihouses.com/property/search/buy/diva/
If you want daily property update details please follow us on Facebook Page / YouTube Channel / Twitter
